FAQ: What Does Mean On A Softball Bat?

What does drop 11 mean on a softball bat?

Length- Drop= Weight. For example, a 32-inch bat with a -9 ‘drop’ would weigh in at 23 oz. while a 32-inch bat with a -10 ‘drop’ would be 22 oz. -8, -9 and endloaded bats give you more power with each swing due to extra weight. -10 and -11 are for hitters with quicker bat speeds and looking to get on base everytime.

What does mean on my softball bat?

The number that you see on bats refers to the length of the bat (in inches) subtracted from the weight (in ounces). So if you have a bat that’s 28 inches long that weighs 20 ounces you’d have a -8 bat. These allow you to get a longer bat in lighter weights.

How do you pick the right size softball bat?

There are three ways to measure whether a bat is the right length: Place the bat knob at the center of your chest and extend the barrel out toward your fingertips. If you can touch the end of the bat with your fingertips, the bat should be an appropriate size.

You might be interested:  How Intense Is A Fast-pitch Softball Game?

What does drop 9 mean on a softball bat?

The higher the drop, the lighter the bat. The smaller the drop, the heavier the bat. In each of those categories there will be a number e.g. -10oz, -11oz, -12oz etc. Those numbers are the DROP which represent the weight difference between the length of the bat and the actual weight of the bat.

How long should a softball bat last?

anywhere between 1-4000 swings. depends on how hard you swing, how hard the balls you hit are, how durable the bat is, etc.

What drop should my softball bat be?

According to most research that you’ll find online, most bat companies will suggest that ages 8 and under use a -12 to -14 bat, a -12 to -10 for ages 8-14, and for 14 and over an -11 to -8. So for youth softball bats we should be looking at -12 down to a -14 bat.

Why do softball players have 2 bats?

Softball players use two bats to warm up, and though it may look a bit odd, it serves an instrumental purpose. These two bats will effectively add weight to a player’s practice swing. The weight of the second bat will cause the player to exert more effort when swinging during the actual game.

What weight bat should I use?

Choosing the Correct Weight Youth Bat: Weigh Him/Her In general: Children under 60 pounds should swing a bat between 26 and 29 inches long. Children weighing more than 70 pounds should swing a bat ranging from 28 to 32 inches long.

Is a heavier softball bat better?

1) Softball Bat Weight As a general rule, bigger, stronger players usually prefer a heavier bat for maximum power. Smaller players usually benefit from a lighter bat that allows greater bat speed.

You might be interested:  Quick Answer: Why Do They Call It Softball?

Does a heavier softball bat hit farther?

Doubling the mass of the bat results in an increase of almost 12mph. So, using a heavier bat should result in faster hit balls, which means the hit ball will travel farther.

What softball bat is legal for high school?

As a general rule, all fast pitch softball bats must have a 2 1/4 inch barrel diameter and must not be over 34 inches in length and 31 1/2 oz in weight. Bats must also be marked with the USA/ASA Certified stamp.

Is a drop 3 bat good?

The performance offered by this bat is quite high quality and the exit ratio this bat is capable of is outstanding. The sweet spot this bat is capable of is large even when compared with some of the most powerful drop 3 bats on the market. Another amazing feature is the material this barrel is made out of.

What bats drop 13 year olds?

Weight drops vary in Senior League baseball, but players 10 years old and under often use -10 weight drop bat. Players 12 years old and under often use a -8 weight drop, and 13 year old players often use a -5 weight drop.

What does end loaded softball bat mean?

An end loaded bat is one that has a portion of its weight distributed towards the end of the barrel. While end loaded bats are more difficult to control through the swing path, they can produce an increase in power generated on-contact. This is done by focusing the weight distribution to the hitting zone of the barrel.

Leave a Reply

Your email address will not be published. Required fields are marked *